Yamaha Yard Built - Bolt 'Glen Burnie Motorsports, LLC'

Yard Built Home - Dealer Built  >  Bolt by Glen Burnie Motorsports, LLC

Yard Built Bolt by Glen Burnie Motorsports, LLC

The Outcome: "BOLTOX"

The rear fender was cut, trimmed and re-welded to achieve the proper radius around the Avon Venom 180/70/16 rear tire. A Low & Mean tag relocation kit was installed and LED turn signals were custom mounted to the frame.

A flush mount gas cap was custom fitted to the tank to make the air brush work flow. The attention to detail was critical during the build.

We turn on the lathe and a custom gauge mounting bezel emerged for the Bolt stock tachometer.

The Star Accessories custom spoke wheels also got a bit of treatment done. After unlacing each wheel the spokes were sent out to powder coating and a satin black finish was applied. The front fork for the Bolt also went under the knife, and the front fender tabs were trimmed off to achieve a cleaner and smoother look.

After minor modifications to the Star lowering shocks, the proper ride height was achieved giving the bike the desired stance.

First and foremost we would like to thank our Dealership Principal Lou Gardner, and our G.M. Matthew Gardner for allowing us to enter this contest. Our thanks to Star motorcycles for creating an outstanding product. Last but not least, we would like to thank the entire team at Glen Burnie Motorsports for contributing their knowledge, experience and time into this project.